8 AWG 19-Stranded THHN Black Copper Building Wire (200ft cut)

Applications:
Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC). 8 AWG THHN-THWN-2 is permitted for new construction or rewiring for 600-volt applications. Applications requiring Type THHN or THWN-2, the conductor is appropriate for use in wet or dry locations at temperatures not to exceed 90°C or not to exceed 60°C in oil or coolants. Applications requiring Type AWM conductor is appropriate for use in dry locations at 90°C, or not to exceed 60°C in wet locations or where exposed to oils or coolants. Applications requiring Type AWM conductor is appropriate for use at temperatures to not exceed 105°C in dry locations.

Also Known As:
8 AWG Copper wire, 8 AWG THWN-2, 8 AWG Building Wire, hook up wire, conduit wire, lighting wire, nylon copper wire, construction cable, 8 Gauge Wire.

Features
Nylon outer jacket for easy pulling. VW-1 rated 14 AWG – 8 AWG. All sizes are rated gasoline and oil-resistant II.

Jacket:
A tough, polyamide, Nylon outer covering per UL-1063 and UL-83.

Standards:
Underwriters Laboratories Standards UL-83, UL-1063, UL-758
AWM Spec 1316, 1317, 1318, 1319, 1320, 1321
ASTM Stranding Class B3, B8, B787
Federal Specification A-A-59544
NEMA WC70/ICEA S-95-658
Institute of Electrical and Electronics Engineers

Constrction:
Insulation:Color-coded Polyvinyl Chloride (PVC), heat and moisture-resistant, flame-retardant compound per UL-1063 and UL-8

Specifications:
Size:8 AWG
Number of Strands:19
PVC Insulation Thickness (Conductor):0.760 mm / 0.030 inches
Nylon Jacket Thickness:0.130 mm / 0.005 inches
Outside Diameter:5.39 mm / 0.212 inches
Weight per Foot: 0.069 lbs
Allowable Ampacity:40 Amps at 60℃ / 50 Amps at 75℃ / 55 Amps at 90℃

Make sure this fits by entering your model number.
#8 AWG Commercial Wiring for Outlets, Switches and Other Loads
Contains Copper (Cu) Conductors Made with Annealed (Soft), Compressed Copper
Can be Used in Wet or Dry Locations. Insulation is High Heat and Moisture Resistant Polyvinyl Chloride (PVC). Jacket is Abrasion, Moisture, Gasoline, and Oil Resistant Nylon
Has an Allowable Ampacity of: 40 Amps at 60 Degrees Celsius, 50Amps at 75 Degrees Celsius, and 95 Amps at 55 degrees Celsius
Rated for 600-Volts with a Heat Capacity of up to 60 Degrees Celsius in Wet Locations and 105 Degrees Celcius in Dry Locations.